✓ Open 24 hours, 7 days a week✓ Licensed & insured technicians✓ Flat-rate pricing — no overtime fees
24/7 Dispatch(866) 548-3173
Call NowFree quote
Enhanced Coverage Zone

HVAC Repair in Dallas, TX75370

Arctic Air Heating & Cooling dispatches licensed, insured heating and air conditioning technicians toDallas and the 75370 ZIP code 24 hours a day, 7 days a week. Target response time in this service zone: 60-90 minutes.

7Local Techs
60-90 minutesTarget Response
1,006Jobs Completed
4.7★394 Reviews

We keep licensed, background-checked technicians on the road in Dallas and the surrounding 75370 service area, so a no-cool or no-heat call usually gets a same-visit fix rather than a return trip.

Available Now — 24/7

Talk to a live dispatcher in Dallas

Serving 75370 and Dallas County — no phone trees, no callback waiting.

  • A live dispatcher answers — never a phone tree or an answering service script
  • Flat-rate pricing agreed before a single tool comes out
  • Licensed, insured and background-checked technicians only
  • Common failure parts stocked on every truck
(866) 548-3173Tap to call — free quote, no obligation

★★★★★4.7 average · 394 verified reviews

  • Licensed & Insured Technicians
  • Background-Checked Crews
  • Upfront Flat-Rate Pricing
  • Same-Day & Next-Day Service
  • No Overtime Charges
  • All Work Warrantied

The Dallas75370 calls we answer most often

If your system is doing any of the following, it is worth a diagnostic before the fault gets more expensive.

Furnace lights then shuts down after a few seconds

Heat pump stuck blowing cold air in heating mode

One or two rooms that never reach the set temperature

Breaker trips every time the system starts

Loud banging on start-up (compressor slugging)

Pilot light or hot surface igniter failing repeatedly

Describe your problem — (866) 548-3173

Heating and air conditioning service built around Dallas

If your high-capacity split air conditioning with gas or electric heat has started short cycling, blowing warm air or making a noise it never used to make, you are not alone — Dallas generates some of the highest call volume we handle in Texas. Extended extreme heat, attic temperatures well above 140 degrees, and grid stress during heat waves are the norm.

Local homeowners often run their system harder than the design intended, especially during March through November. That accelerates wear on contactors, capacitors and blower bearings.

Local equipment profile:Texas homes are most often served by high-capacity split air conditioning with gas or electric heat. Extended extreme heat, attic temperatures well above 140 degrees, and grid stress during heat waves are the norm.

Because Texas runs high-capacity split air conditioning with gas or electric heat, the transition between seasons is when we see the most emergency calls — equipment that sat unused for months.

Typical Dallas service pricing

ServiceTypical Range
Diagnostic / service call$70 – $140
Capacitor replacement$167 – $391
Contactor replacement$177 – $419
Refrigerant leak repair + recharge$298 – $837
Blower motor replacement$419 – $884
Compressor replacement$1,302 – $2,697
Hot surface igniter / flame sensor$149 – $372
Furnace control board$353 – $791
Condensate drain / float switch$121 – $316
Thermostat install (wired or smart)$140 – $419
Duct cleaning (whole home)$353 – $837
Full system replacement (installed)$5,580 – $12,090

Market ranges reported for Dallas, TX and the wider South-Central region. Your flat-rate quote is confirmed on site before any work begins.

Services available in 75370

Residential and light commercial, all major brands, all hours.

Air Conditioning Repair in Dallas

Diagnosis and repair for central air conditioners, heat pumps in cooling mode, ductless mini-splits and packaged rooftop units.

Furnace Repair in Dallas

Gas, propane, oil and electric furnace troubleshooting and repair.

HVAC Installation & Replacement in Dallas

Full system replacement and new construction installs with a Manual J load calculation so the equipment is actually sized for your home.

Heat Pump Repair & Service in Dallas

Heat pump diagnosis and repair for both heating and cooling operation, including cold-climate units, defrost board failures, reversing valve problems, auxiliary heat strip faults and refrigerant charge issues.

24/7 Emergency HVAC Repair in Dallas

Around-the-clock response for no-heat in freezing weather, total AC failure during a heat wave, gas smells, carbon monoxide alarms, water flooding from the indoor unit and complete system shutdowns.

Air Duct Cleaning & Sealing in Dallas

Whole-home duct cleaning and aeroseal-style duct sealing to recover lost airflow, reduce dust and lower the load on your equipment.

HVAC Maintenance & Tune-Up in Dallas

Seasonal precision tune-ups that catch failing components before they strand you.

Commercial HVAC Service in Dallas

Service for light commercial and commercial properties including rooftop packaged units, VRF and VRV systems, split systems, make-up air units and building automation controls.

What happens when you call

No forms, no waiting for a callback window. One phone call starts the whole process.

  1. Step 1: Call the dispatch lineYou reach a live dispatcher, not a recording. They confirm your address, the symptom you are seeing and how urgent it is.
  2. Step 2: Get matched to the nearest licensed techDispatch routes your job to the closest available licensed technician who already carries the common parts for your equipment.
  3. Step 3: On-site diagnosis with a flat quoteThe tech tests the system, shows you what failed and gives you a written flat-rate price before any work starts.
  4. Step 4: Approved repair, same visit when possibleMost repairs are finished on the first visit. If a part has to be ordered you get a firm return window, not a maybe.

Servicing Dallas and Dallas County

Our 75370 coverage zone centres on Dallas and extends to the surrounding communities listed below. Every technician dispatched into this area is licensed, insured and background-checked, and every job carries a workmanship warranty.

What Dallas homeowners say

“Called at 9pm on a Sunday with no heat and a toddler in the house. Tech was here inside an hour, found a failed igniter, had one on the truck.”

— Dana R., verified Dallas customer

“New ductless install, clean work, and they actually did a load calculation instead of just matching the old unit size.”

— Kevin M., verified Dallas customer

Read more Arctic Air customer reviews →

Dallas75370 HVAC questions, answered

Do you charge extra for nights, weekends or holidays?

No. Our pricing in Texas is the same at 2am on a holiday as it is at 2pm on a Tuesday. Emergency calls are dispatched the same way as scheduled calls and carry no overtime premium.

Do you handle ductless mini-split systems?

Yes. Ductless installations have grown quickly in Texas, particularly in older homes without existing ductwork. We service indoor heads, clean filters and drain lines, check line-set insulation and diagnose communication faults between heads and the outdoor unit.

Do you service commercial and light commercial properties?

Yes. Around Dallas we handle rooftop packaged units, split systems, VRF/VRV installations and building automation faults for offices, retail, restaurants and multi-tenant buildings, including after-hours scheduling so you are not disrupting trade.

Should I repair my system or replace it?

The usual rule of thumb: if the repair costs more than half the price of a replacement and the equipment is over ten years old, replacement generally wins. We will run that comparison with you on site and show you the maths — and if the honest answer is a $180 capacitor rather than a $9,000 system, that is the answer you get.

What does a new system cost in Dallas?

A complete residential replacement in the 75370 area generally lands between $6,000 and $13,000 installed, depending on capacity, efficiency rating and how much ductwork has to be modified. We always perform a Manual J load calculation first, because an oversized unit costs more to buy and runs worse than a correctly sized one.

Why is my system short cycling?

Short cycling in Dallas most often comes from a restricted airflow path — a loaded filter, a closed register, an undersized return — or from an oversized unit. It can also be a failing flame sensor or a pressure switch fault. We measure static pressure and temperature rise before concluding anything, because guessing at this one is expensive.

Need HVAC help in Dallas 75370?

Do not wait until the house is unbearable. Call (866) 548-3173, get a real diagnosis, and get a written price before any work starts.

(866) 548-3173Answered 24 hours a day, 365 days a year
Call (866) 548-3173