HVAC Repair in Utah — 24/7 Heating & Air Conditioning Service

Refrigerant does not get "used up" the way fuel does. If your charge is low, there is a leak somewhere — usually at a flare connection, a schrader core or the evaporator coil. We locate and repair the leak rather than simply topping up the charge, because a top-up alone will fail again.

Short cycling in Utah most often comes from a restricted airflow path — a loaded filter, a closed register, an undersized return — or from an oversized unit. It can also be a failing flame sensor or a pressure switch fault. We measure static pressure and temperature rise before concluding anything, because guessing at this one is expensive.

Monthly inspection and replacement every 60 to 90 days is the baseline. Homes in Utah with pets, ongoing construction nearby, or a high-MERV filter in an undersized return should move to monthly changes. A loaded filter is the single most common cause of frozen coils and failed blower motors.

With any combustion appliance, yes. A cracked heat exchanger can spill carbon monoxide into the living space, and it is odourless. We perform combustion analysis and a CO test on every furnace and boiler call in Utah, and we recommend a working CO alarm on every level of the home regardless of who services your equipment.

For the service area our target response time is 60-90 minutes from the moment dispatch confirms your address. Real-world timing depends on the day — the first sustained heat or cold snap of the season is always our busiest period — but we hold technicians locally specifically so that window is achievable rather than aspirational.