HVAC Repair in Industry, TX78944
Arctic Air Heating & Cooling dispatches licensed, insured heating and air conditioning technicians toIndustry and the 78944 ZIP code 24 hours a day, 7 days a week. Target response time in this service zone: 2-4 hours.
Homeowners across Industry call us when the system simply will not keep up. Extended extreme heat, attic temperatures well above 140 degrees, and grid stress during heat waves are the norm. That is why we staff a live dispatch line around the clock instead of routing you to a queue.
Talk to a live dispatcher in Industry
Serving 78944 and Austin County — no phone trees, no callback waiting.
- We test airflow and static pressure, not just refrigerant charge
- Combustion and carbon monoxide testing on every furnace call
- Digital condition report sent to you the same day
- Financing available on qualifying replacements
★★★★★4.9 average · 100 verified reviews
- Licensed & Insured Technicians
- Background-Checked Crews
- Upfront Flat-Rate Pricing
- Same-Day & Next-Day Service
- No Overtime Charges
- All Work Warrantied
The Industry78944 calls we answer most often
If your system is doing any of the following, it is worth a diagnostic before the fault gets more expensive.
Thermostat reading several degrees off from reality
Furnace lights then shuts down after a few seconds
One or two rooms that never reach the set temperature
Short cycling — on and off every few minutes
No cool air, or air that is barely cooler than the room
Loud banging on start-up (compressor slugging)
Heating and air conditioning service built around Industry
Most of the work we do in Industry starts the same way: the system is running but the house is not comfortable. Before we replace anything, we measure airflow, static pressure and temperatures so you are paying for the actual fault.
Homes in Austin County tend to be a mix of older builds with original ductwork and newer infill construction, which means airflow problems show up very differently from one street to the next.
The busiest week of our year in Industry is the first stretch of sustained march weather. Systems that idled all season fail in clusters.
Typical Industry service pricing
| Service | Typical Range |
|---|---|
| Diagnostic / service call | $70 – $140 |
| Capacitor replacement | $167 – $391 |
| Contactor replacement | $177 – $419 |
| Refrigerant leak repair + recharge | $298 – $837 |
| Blower motor replacement | $419 – $884 |
| Compressor replacement | $1,302 – $2,697 |
| Hot surface igniter / flame sensor | $149 – $372 |
| Furnace control board | $353 – $791 |
| Condensate drain / float switch | $121 – $316 |
| Thermostat install (wired or smart) | $140 – $419 |
| Duct cleaning (whole home) | $353 – $837 |
| Full system replacement (installed) | $5,580 – $12,090 |
Market ranges reported for Industry, TX and the wider South-Central region. Your flat-rate quote is confirmed on site before any work begins.
Services available in 78944
Residential and light commercial, all major brands, all hours.
Air Conditioning Repair in Industry
Diagnosis and repair for central air conditioners, heat pumps in cooling mode, ductless mini-splits and packaged rooftop units.
Furnace Repair in Industry
Gas, propane, oil and electric furnace troubleshooting and repair.
HVAC Installation & Replacement in Industry
Full system replacement and new construction installs with a Manual J load calculation so the equipment is actually sized for your home.
Heat Pump Repair & Service in Industry
Heat pump diagnosis and repair for both heating and cooling operation, including cold-climate units, defrost board failures, reversing valve problems, auxiliary heat strip faults and refrigerant charge issues.
24/7 Emergency HVAC Repair in Industry
Around-the-clock response for no-heat in freezing weather, total AC failure during a heat wave, gas smells, carbon monoxide alarms, water flooding from the indoor unit and complete system shutdowns.
Air Duct Cleaning & Sealing in Industry
Whole-home duct cleaning and aeroseal-style duct sealing to recover lost airflow, reduce dust and lower the load on your equipment.
HVAC Maintenance & Tune-Up in Industry
Seasonal precision tune-ups that catch failing components before they strand you.
Commercial HVAC Service in Industry
Service for light commercial and commercial properties including rooftop packaged units, VRF and VRV systems, split systems, make-up air units and building automation controls.
What happens when you call
No forms, no waiting for a callback window. One phone call starts the whole process.
- Step 1: Call the dispatch lineYou reach a live dispatcher, not a recording. They confirm your address, the symptom you are seeing and how urgent it is.
- Step 2: Get matched to the nearest licensed techDispatch routes your job to the closest available licensed technician who already carries the common parts for your equipment.
- Step 3: On-site diagnosis with a flat quoteThe tech tests the system, shows you what failed and gives you a written flat-rate price before any work starts.
- Step 4: Approved repair, same visit when possibleMost repairs are finished on the first visit. If a part has to be ordered you get a firm return window, not a maybe.
Servicing Industry and Austin County
Our 78944 coverage zone centres on Industry and extends to the surrounding communities listed below. Every technician dispatched into this area is licensed, insured and background-checked, and every job carries a workmanship warranty.
What Industry homeowners say
“Called at 9pm on a Sunday with no heat and a toddler in the house. Tech was here inside an hour, found a failed igniter, had one on the truck.”
— Dana R., verified Industry customer
“AC died during a heat advisory. Dispatch was honest that it would be a few hours, then called me the moment a slot opened.”
— Angela W., verified Industry customer
Industry78944 HVAC questions, answered
How much does an HVAC service call cost in 78944?
A diagnostic visit in Industry typically runs $75 to $150, and that fee is usually applied toward the repair if you approve the work. Repair prices are quoted as a flat rate before we start, so the number you approve is the number you pay regardless of how long the job takes.
What does a new system cost in Industry?
A complete residential replacement in the 78944 area generally lands between $6,000 and $13,000 installed, depending on capacity, efficiency rating and how much ductwork has to be modified. We always perform a Manual J load calculation first, because an oversized unit costs more to buy and runs worse than a correctly sized one.
Do you offer maintenance plans?
We do. A two-visit plan in Texas covers a spring cooling inspection and an autumn heating inspection, priority scheduling during peak weeks, discounted repairs and no diagnostic fee. Members rarely end up on the emergency list.
How often should I change my filter in 78944?
Monthly inspection and replacement every 60 to 90 days is the baseline. Homes in Industry with pets, ongoing construction nearby, or a high-MERV filter in an undersized return should move to monthly changes. A loaded filter is the single most common cause of frozen coils and failed blower motors.
Do you charge extra for nights, weekends or holidays?
No. Our pricing in Texas is the same at 2am on a holiday as it is at 2pm on a Tuesday. Emergency calls are dispatched the same way as scheduled calls and carry no overtime premium.
Should I repair my system or replace it?
The usual rule of thumb: if the repair costs more than half the price of a replacement and the equipment is over ten years old, replacement generally wins. We will run that comparison with you on site and show you the maths — and if the honest answer is a $180 capacitor rather than a $9,000 system, that is the answer you get.
HVAC service near Industry, TX
We also cover these Texas communities with the same 24/7 dispatch line.
Need HVAC help in Industry 78944?
Whatever the make — Bryant, Trane, Carrier or anything else — call (866) 548-3173. Our crews in the 78944 area service all major residential and light commercial brands.
(866) 548-3173Answered 24 hours a day, 365 days a year