HVAC Repair in Kenmore, WA98028
Arctic Air Heating & Cooling dispatches licensed, insured heating and air conditioning technicians toKenmore and the 98028 ZIP code 24 hours a day, 7 days a week. Target response time in this service zone: 60-90 minutes.
Serving Kenmore and the wider King County area, our crews carry the common failure parts on the truck — capacitors, contactors, igniters, flame sensors, motors and filters — so the first visit is usually the last one.
Talk to a live dispatcher in Kenmore
Serving 98028 and King County — no phone trees, no callback waiting.
- 60-90 minutes target response time in this service zone
- Written diagnostic report with photos of what we found
- We repair what can be repaired — no forced replacement upsell
- Workmanship warranty on every job we complete
★★★★★4.8 average · 431 verified reviews
- Licensed & Insured Technicians
- Background-Checked Crews
- Upfront Flat-Rate Pricing
- Same-Day & Next-Day Service
- No Overtime Charges
- All Work Warrantied
The Kenmore98028 calls we answer most often
If your system is doing any of the following, it is worth a diagnostic before the fault gets more expensive.
Skyrocketing utility bills with no change in usage
Thermostat reading several degrees off from reality
Dead or bulging run capacitor on the condenser
Musty or burnt smell the first time the system runs
Yellow or orange burner flame instead of steady blue
Heat pump stuck blowing cold air in heating mode
Heating and air conditioning service built around Kenmore
We keep licensed, background-checked technicians on the road in Kenmore and the surrounding 98028 service area, so a no-cool or no-heat call usually gets a same-visit fix rather than a return trip.
In the 98028 area we see a lot of attic-mounted air handlers. Attic heat soak in summer and cold-soak in winter both shorten component life and make insulation checks part of a proper diagnosis.
The busiest week of our year in Kenmore is the first stretch of sustained july weather. Systems that idled all season fail in clusters.
Typical Kenmore service pricing
| Service | Typical Range |
|---|---|
| Diagnostic / service call | $84 – $168 |
| Capacitor replacement | $202 – $470 |
| Contactor replacement | $213 – $504 |
| Refrigerant leak repair + recharge | $358 – $1,008 |
| Blower motor replacement | $504 – $1,064 |
| Compressor replacement | $1,568 – $3,248 |
| Hot surface igniter / flame sensor | $179 – $448 |
| Furnace control board | $426 – $952 |
| Condensate drain / float switch | $146 – $381 |
| Thermostat install (wired or smart) | $168 – $504 |
| Duct cleaning (whole home) | $426 – $1,008 |
| Full system replacement (installed) | $6,720 – $14,560 |
Market ranges reported for Kenmore, WA and the wider Northwest region. Your flat-rate quote is confirmed on site before any work begins.
Services available in 98028
Residential and light commercial, all major brands, all hours.
Air Conditioning Repair in Kenmore
Diagnosis and repair for central air conditioners, heat pumps in cooling mode, ductless mini-splits and packaged rooftop units.
Furnace Repair in Kenmore
Gas, propane, oil and electric furnace troubleshooting and repair.
HVAC Installation & Replacement in Kenmore
Full system replacement and new construction installs with a Manual J load calculation so the equipment is actually sized for your home.
Heat Pump Repair & Service in Kenmore
Heat pump diagnosis and repair for both heating and cooling operation, including cold-climate units, defrost board failures, reversing valve problems, auxiliary heat strip faults and refrigerant charge issues.
24/7 Emergency HVAC Repair in Kenmore
Around-the-clock response for no-heat in freezing weather, total AC failure during a heat wave, gas smells, carbon monoxide alarms, water flooding from the indoor unit and complete system shutdowns.
Air Duct Cleaning & Sealing in Kenmore
Whole-home duct cleaning and aeroseal-style duct sealing to recover lost airflow, reduce dust and lower the load on your equipment.
HVAC Maintenance & Tune-Up in Kenmore
Seasonal precision tune-ups that catch failing components before they strand you.
Commercial HVAC Service in Kenmore
Service for light commercial and commercial properties including rooftop packaged units, VRF and VRV systems, split systems, make-up air units and building automation controls.
What happens when you call
No forms, no waiting for a callback window. One phone call starts the whole process.
- Step 1: Call the dispatch lineYou reach a live dispatcher, not a recording. They confirm your address, the symptom you are seeing and how urgent it is.
- Step 2: Get matched to the nearest licensed techDispatch routes your job to the closest available licensed technician who already carries the common parts for your equipment.
- Step 3: On-site diagnosis with a flat quoteThe tech tests the system, shows you what failed and gives you a written flat-rate price before any work starts.
- Step 4: Approved repair, same visit when possibleMost repairs are finished on the first visit. If a part has to be ordered you get a firm return window, not a maybe.
Servicing Kenmore and King County
Our 98028 coverage zone centres on Kenmore and extends to the surrounding communities listed below. Every technician dispatched into this area is licensed, insured and background-checked, and every job carries a workmanship warranty.
What Kenmore homeowners say
“New ductless install, clean work, and they actually did a load calculation instead of just matching the old unit size.”
— Kevin M., verified Kenmore customer
“They found a cracked heat exchanger that our previous company missed for two years. That alone was worth the call.”
— Sandra B., verified Kenmore customer
Kenmore98028 HVAC questions, answered
Do you charge extra for nights, weekends or holidays?
No. Our pricing in Washington is the same at 2am on a holiday as it is at 2pm on a Tuesday. Emergency calls are dispatched the same way as scheduled calls and carry no overtime premium.
Can you give me a price over the phone?
We can give you realistic ranges — and this page lists the ones homeowners in Kenmore see most often — but a firm price needs eyes on the equipment. Any company that quotes a final number without seeing the unit is usually quoting low to get through the door.
Do you handle ductless mini-split systems?
Yes. Ductless installations have grown quickly in Washington, particularly in older homes without existing ductwork. We service indoor heads, clean filters and drain lines, check line-set insulation and diagnose communication faults between heads and the outdoor unit.
Why is my system short cycling?
Short cycling in Kenmore most often comes from a restricted airflow path — a loaded filter, a closed register, an undersized return — or from an oversized unit. It can also be a failing flame sensor or a pressure switch fault. We measure static pressure and temperature rise before concluding anything, because guessing at this one is expensive.
Do you service commercial and light commercial properties?
Yes. Around Kenmore we handle rooftop packaged units, split systems, VRF/VRV installations and building automation faults for offices, retail, restaurants and multi-tenant buildings, including after-hours scheduling so you are not disrupting trade.
Is my system low on refrigerant, or is it leaking?
Refrigerant does not get "used up" the way fuel does. If your charge is low, there is a leak somewhere — usually at a flare connection, a schrader core or the evaporator coil. We locate and repair the leak rather than simply topping up the charge, because a top-up alone will fail again.
HVAC service near Kenmore, WA
We also cover these Washington communities with the same 24/7 dispatch line.
Need HVAC help in Kenmore 98028?
If you are not sure whether it is worth repairing, call (866) 548-3173 anyway. A flat-rate diagnostic tells you the real number, and you decide from there.
(866) 548-3173Answered 24 hours a day, 365 days a year