HVAC Repair in Seattle, WA98116
Arctic Air Heating & Cooling dispatches licensed, insured heating and air conditioning technicians toSeattle and the 98116 ZIP code 24 hours a day, 7 days a week. Target response time in this service zone: 60-90 minutes.
Most of the work we do in Seattle starts the same way: the system is running but the house is not comfortable. Before we replace anything, we measure airflow, static pressure and temperatures so you are paying for the actual fault.
Talk to a live dispatcher in Seattle
Serving 98116 and King County — no phone trees, no callback waiting.
- No overtime charges for evenings, weekends or holidays
- Manufacturer-trained on Trane, Mitsubishi Electric and Amana equipment
- Free second opinion on any replacement quote over $3,000
- Upfront honesty: if it is a $40 capacitor, we say so
★★★★★4.9 average · 61 verified reviews
- Licensed & Insured Technicians
- Background-Checked Crews
- Upfront Flat-Rate Pricing
- Same-Day & Next-Day Service
- No Overtime Charges
- All Work Warrantied
The Seattle98116 calls we answer most often
If your system is doing any of the following, it is worth a diagnostic before the fault gets more expensive.
Furnace lights then shuts down after a few seconds
Outdoor condenser humming but the fan not turning
Musty or burnt smell the first time the system runs
Dead or bulging run capacitor on the condenser
Frozen evaporator coil or ice on the refrigerant lines
Refrigerant leak at a flare or coil connection
Heating and air conditioning service built around Seattle
Serving Seattle and the wider King County area, our crews carry the common failure parts on the truck — capacitors, contactors, igniters, flame sensors, motors and filters — so the first visit is usually the last one.
Local homeowners often run their system harder than the design intended, especially during July and August. That accelerates wear on contactors, capacitors and blower bearings.
Heating season here is November through March. A pre-season inspection catches cracked heat exchangers and failing igniters before the first real cold snap.
Typical Seattle service pricing
| Service | Typical Range |
|---|---|
| Diagnostic / service call | $84 – $168 |
| Capacitor replacement | $202 – $470 |
| Contactor replacement | $213 – $504 |
| Refrigerant leak repair + recharge | $358 – $1,008 |
| Blower motor replacement | $504 – $1,064 |
| Compressor replacement | $1,568 – $3,248 |
| Hot surface igniter / flame sensor | $179 – $448 |
| Furnace control board | $426 – $952 |
| Condensate drain / float switch | $146 – $381 |
| Thermostat install (wired or smart) | $168 – $504 |
| Duct cleaning (whole home) | $426 – $1,008 |
| Full system replacement (installed) | $6,720 – $14,560 |
Market ranges reported for Seattle, WA and the wider Northwest region. Your flat-rate quote is confirmed on site before any work begins.
Services available in 98116
Residential and light commercial, all major brands, all hours.
Air Conditioning Repair in Seattle
Diagnosis and repair for central air conditioners, heat pumps in cooling mode, ductless mini-splits and packaged rooftop units.
Furnace Repair in Seattle
Gas, propane, oil and electric furnace troubleshooting and repair.
HVAC Installation & Replacement in Seattle
Full system replacement and new construction installs with a Manual J load calculation so the equipment is actually sized for your home.
Heat Pump Repair & Service in Seattle
Heat pump diagnosis and repair for both heating and cooling operation, including cold-climate units, defrost board failures, reversing valve problems, auxiliary heat strip faults and refrigerant charge issues.
24/7 Emergency HVAC Repair in Seattle
Around-the-clock response for no-heat in freezing weather, total AC failure during a heat wave, gas smells, carbon monoxide alarms, water flooding from the indoor unit and complete system shutdowns.
Air Duct Cleaning & Sealing in Seattle
Whole-home duct cleaning and aeroseal-style duct sealing to recover lost airflow, reduce dust and lower the load on your equipment.
HVAC Maintenance & Tune-Up in Seattle
Seasonal precision tune-ups that catch failing components before they strand you.
Commercial HVAC Service in Seattle
Service for light commercial and commercial properties including rooftop packaged units, VRF and VRV systems, split systems, make-up air units and building automation controls.
What happens when you call
No forms, no waiting for a callback window. One phone call starts the whole process.
- Step 1: Call the dispatch lineYou reach a live dispatcher, not a recording. They confirm your address, the symptom you are seeing and how urgent it is.
- Step 2: Get matched to the nearest licensed techDispatch routes your job to the closest available licensed technician who already carries the common parts for your equipment.
- Step 3: On-site diagnosis with a flat quoteThe tech tests the system, shows you what failed and gives you a written flat-rate price before any work starts.
- Step 4: Approved repair, same visit when possibleMost repairs are finished on the first visit. If a part has to be ordered you get a firm return window, not a maybe.
Servicing Seattle and King County
Our 98116 coverage zone centres on Seattle and extends to the surrounding communities listed below. Every technician dispatched into this area is licensed, insured and background-checked, and every job carries a workmanship warranty.
What Seattle homeowners say
“Two other companies told me I needed a whole new system. These guys found a $210 capacitor. I will never call anyone else.”
— Marcus T., verified Seattle customer
“New ductless install, clean work, and they actually did a load calculation instead of just matching the old unit size.”
— Kevin M., verified Seattle customer
Seattle98116 HVAC questions, answered
Do you offer maintenance plans?
We do. A two-visit plan in Washington covers a spring cooling inspection and an autumn heating inspection, priority scheduling during peak weeks, discounted repairs and no diagnostic fee. Members rarely end up on the emergency list.
Are your technicians licensed and insured?
Every technician dispatched into Seattle is licensed, insured and background-checked. We can provide proof of insurance on request before the visit if you would like it on file.
Is my carbon monoxide risk something I should worry about?
With any combustion appliance, yes. A cracked heat exchanger can spill carbon monoxide into the living space, and it is odourless. We perform combustion analysis and a CO test on every furnace and boiler call in Seattle, and we recommend a working CO alarm on every level of the home regardless of who services your equipment.
How quickly can a technician get to Seattle?
For the 98116 service area our target response time is 60-90 minutes from the moment dispatch confirms your address. Real-world timing depends on the day — the first sustained heat or cold snap of the season is always our busiest period — but we hold technicians locally specifically so that window is achievable rather than aspirational.
What brands do you service in Seattle?
All of them. Our 98116 technicians are trained on Trane, Mitsubishi Electric, Amana, Heil and essentially every other residential brand sold in Washington, including discontinued lines. We keep a broad parts catalogue on the trucks for exactly that reason.
Should I repair my system or replace it?
The usual rule of thumb: if the repair costs more than half the price of a replacement and the equipment is over ten years old, replacement generally wins. We will run that comparison with you on site and show you the maths — and if the honest answer is a $180 capacitor rather than a $9,000 system, that is the answer you get.
HVAC service near Seattle, WA
We also cover these Washington communities with the same 24/7 dispatch line.
Need HVAC help in Seattle 98116?
Do not wait until the house is unbearable. Call (866) 548-3173, get a real diagnosis, and get a written price before any work starts.
(866) 548-3173Answered 24 hours a day, 365 days a year